Level Transmitters & Controllers - Iran Madar

IMC 650 / Hydrostatic Level Transmitter / for Dams & Wells

 

 

Continuous level probe,
submersible and 4-20mA output

 

 

 

 

PSL 5.0 / Pump Station Level Controller

New Pump and Lift Station Level Controller
Ideal for sewage pump stations, lift stations, wet wells and tank level control with a non-contacting ultrasonic sensor mounted above the liquid. The new Greyline PSL 5.0 Level Controller has 6 independently programmable control relays for pump or valve control, level alarms, dialers, temperature alarm and echo-loss alarm.

Mount the non-contacting, ultrasonic sensor in the tank or wet well and install the watertight electronics in the control room or any location within 500 ft / 150 m. Use the simple menu system and built-in keypad to set up measurement range, relay set points and pump alternation sequence. A relay/pump run time report is updated and stored automatically for viewing on the PSL 5.0 backlit LCD display.

For hazardous locations, the ultrasonic sensor is rated Intrinsically Safe with an optional safety barrier. It is rated for measurement ranges up to 32 ft / 10 m, or use the optional PVC Sensor rated for 50 ft / 15.6 m measurement range.

New Dual-Technology Sensor Feature for Redundant Level Monitoring
Connect a submersible pressure sensor or other 4-20mA level transmitter to the PSL 5.0 for fail-safe hybrid sensing. The PSL 5.0 will auto-calibrate the redundant sensor and if signal is lost to the ultrasonic sensor, the redundant sensor will seamlessly take over monitoring until signal resumes from the ultrasonic. The redundant sensor is continuously monitored to ensure availability during primary sensor failure.

 

Controls, Transmits and Displays

Non-Contacting Ultrasonic Sensor

New Dual-Technology Feature - Redundant Level Sensor Input

6 Relays for Pump Control, Pump Alternation and Level Alarms

Isolated 4-20mA output

Built-in 5-Key Calibrator

Logs and Displays Relay Run Times

 

 

Brochure  PSL 5.0

User Manual  PSL 5.0

 

 

 

 

Lit 25 Level Indicating Transmitter 

LIT25 Level Indicating Transmitter

This new Greyline Transmitter displays, controls and transmits level. Mount the non-contacting ultrasonic sensor at the top of your tank and the compact, watertight electronics/display enclosure at a convenient location nearby. Operators can calibrate the LIT25 with its 2-button Keypad, without climbing the tank. Use the built-in relay for level control or alarm, the large 4-digit display for local indication, and the isolated 4-20mA output to to transmit level to a PLC.

The standard ultrasonic Sensor measures liquid levels up to 32 ft. (10 m), and includes automatic temperature compensation. Choose the optional all-Teflon sensor for chemical compatibility, or one rated to 50 ft (15.6 m) range. All ultrasonic sensors are available with optional intrinsic safety for installation in hazardous rated locations. The LIT25 can also be ordered with gauge-type pressure sensors for special applications.

 

 • Low Cost

 • Isolated 4-20mA Output (1000 ohm)

 • Large LCD Display

 • Programmable Signal Relay

 • Non-Contacting Ultrasonic Sensor or Optional Pressure Sensor

 • Built-in 2-Key Calibrator

 • Watertight, Dust tight Enclosure

 • Self-Testing

 

Brochure LIT 25

User Manual LIT 25

 

 

 

 

IMC 350 IV /  Ultrasonic Level Transmitter / with Datalogger
 

 

 

 

                      

 

Ultrasonic Level meter  IMC 350 III                                                                   Ultrasonic Level meter IMC 350 IV (with Data Logger)

 

 

* For more information and buy "Iran Madar" products , kindly contact sales department.